"PAS" HANGERPRESSURE ACTIVATED SEAL
SAFESET®
|
|
The Series 10-2635 SAFESET® Coiled Tubing Hanger has been designed with intergal slip assembly and seal assemblies. No installation or access windows are required to set the slip and seal assemblies in the SAFESET® Hangers.
|
|
The SAFESET® Hanger allows positive control of the slips at all times. If it is required to re-set the coiled tubing at a different depth after it has been set, you simply back out the
slip release screws to release the coiled tubing and re-set the release screws once at desired
depth. The slips may be set and re-set a number of times without having to pull tubing out of
the hole and without damage to the hanger.
|
|
In addition to the above features this hanger also incorporates "PAS" pressure activated
stripper. The stripper seal isolates the primary slip and seal assembly from any returns which
may be produced out the annulus port. No other coiled tubing hanger on the market has the
unique features of the PEDCOR Coiled Tubing Hangers.
|
|
The SAFESET® hangers with "PAS" allows the operator to make one run to jet out the well
and then hang the coiled tubing. The operator saves the cost of one trip in the hole.
|
