The Pedcor Tubing Isolation Plug was developed as a means to seal the Coil Tubing Bore prior to removal from the well.

The self energizing plug and hydraulic setting tool allows the operator to lubricate in and set the plug from the surface, totally sealing the coil tubing before pulling.

The tubing isolation plug may be set low enough in the coil tubing fore to allow for a Roll-On type connector to be installed onto the coil tubing above the plug.

The plug provides total control of coil tubing pressure during removal of the coil tubing from the well.

SERIES 29-6200 TUBING ISOLATION PLUG:

AVAILABLE FOR 1.25” TO 3-1/2” COIL TUBING: